8'
Kennel kit:
(09) 2" x 4" x
8'
(11)-2" x 4" x
10'
(02) - 2" x 4" x
12'
(03) pounds #16 galvanized
box nails
(02) pounds #10 galvanized
box nails
(01) pound 1-1/4"
galvanized roofing nails
Standard kit comes with (1)
gate panel, (6) side panels, (4) roof panels, (3) floor panels,
plus all stainless steel hardware (locks,nuts,metal
clips,machine bolts,flat washers)
6' Kennel
kit:
(03) 2" x 4" x
8'
(13) 2" x 4" x
10'
(03) 2" x 4" x
12'
(03) pounds #16 galvanized
box nails
(02) pounds #10 galvanized
box nails
(01) pound 1-1/4"
galvanized roofing nails
Standard kit comes with (1)
gate panel, (4) side panels, (3) roof panels, (2) floor panels,
plus all stainless steel hardware (locks,nuts,metal
clips,machine bolts,flat washers)
Tools needed for kennel
construction:
2 hammers, circular or hand
saw, tape measure, small framing and carpenters squares,
phillips screwdrivers (#2 and #3), electric drill, 3/16"
drill bit, *screw gun recommended.
If you did not order a kit
that includes roofing, purchase one of the following:
(01) sheet of 2' x 12'
corrugated roofing or
(01) sheet of 4' x 8'
fiberglass liner
Note: Metal barn roofing
may be substituted in the same width and length
Whelping house kit
Whelping
House Instructions
(02) sheets 1/2"
chipboard (OSB) Note: any type plywood can be used as you prefer
(01) 2" x 4" x
12'
(01) 1" x 4" x
10'
(01) pound #4 galvanized
box nails
(01) pound #6 galvanized
box nails
Standard kit comes with two
piece galvanized lid, 3 hinges, latch with keeper, medium
galvanized door frame, medium right hand louvered aluminum
dog door, stainless steel hardware
Tools needed for
construction:
2 hammers, tape measure,
standard screwdriver, sabre saw with wood blade, electric drill,
3/16" drill bit, exterior wood glue (small bottle),
circular or hand saw, 6" carpenters square, phillips
screwdriver (small), 7/16" wrench, 1/8" drill bit,
1/4" drill bit
Building materials may be
purchased treated or untreated, depending on your
preference. Old treated materials used arsenic and were
very dangerous for usage for pets, but new processes are
safe. Please read below from Home Depot's web site:
SAFETY ALERT: Working with
Pressure-Treated Lumber
Copper-base compounds have replaced formulations containing
arsenic for lumber treatment. Until December 2003, the primary
pressure treatment for wood used chromated copper arsenic (CCA)
as its preservative. The new alkaline copper quaternary (ACQ) or
copper azole treatments are safe for people, animals, and plants
when used as recommended.
http://www.homedepot.com/webapp/wcs/stores/servlet/ContentView?pn=Pressure_Treated&langId=-1&storeId=10051&catalogId=10053
Material pricing from 7/8/08
Home Depot pricing on treated
boards:
2" x 4" x
8' $3.49 each
2" x 4" x 10'
$4.69 each
2" x 4" x 12'
$5.49 each
1" x 4" x 10'
$3.67 each
Galvanized nails from $10.98 and up
for 5#
OSB
1/2" $12.99 and up