Deer Creek Business
WHELPING HOUSE INSTRUCTIONS
ALWAYS USE CAUTION WHEN BUILDING, WEAR SAFETY GOGGLES AND FOLLOW ALL TOOL SAFETY REQUIREMENTS AND RULES.
(2) Sheets 1/2" Chipboard (OSB or any other plywood material you choose)
(1) 2" x 4" x 12' Treated or untreated
(1) 1" x 4" x 10' Untreated
(1) Pound #4 Galvanized Box Nails
(1) Pound #6 Galvanized Box Nails
Note: If possible, have the lumber yard strip the 1 x 4 x 8 untreated board into 3-1" wide strips for you.
2 Hammers Circular or Hand Saw
Tape Measure 6" Carpenters Square
Standard Screwdriver Phillips Screwdriver (Small)
Sabre Saw with Wood Blade 7/16" Wrench
Electric Drill 1/8" Drill Bit
3/16" Drill Bit 1/4" Drill Bit
Exterior Wood Glue (Small Bottle)
Always Use Caution when building, wear safety goggles and follow all tool safety requirements and rules.
Clinching-Bending over the end of a nail that protrudes through the lumber. To clinch a nail-using two hammers, hold one hammer against the head of the nail while bending over the end of the nail with the hammer.
TOLL FREE PHONE: 888-294-6582